Bringing back new more efficient and high-tech solutions is an asset for us.
Innovation
In partnership with the World Leader, Alma offers you a large choice of fittings that meet the requirements of national and international standards to meet the needs of water authorities and pipelines, and with the Certificate of Sanitary Compliance.
ELECTRO-WELDABLE FITTINGS
• SMARTFUSE system for the connection of polyethylene pipes for water supply and for sewerage connections and collectors with pressure.
• Nominal pressure: PN16
• Diameters: from DN 20 mm to DN 315 mm
• Material: Body in black polyethylene PE 100, with resistance sheathed in PE and over-injected – Terminals 4 mm – Very wide hot and cold zones.
• Reference standards: NF EN 12201, AS/NZS 4129, WIS 4-32-14 and WIS 4-32-15
Avantages
- Seamless Assembly
- continuous and self-stopping
- Total tightness ensured with reinforcement by increasing the thickness of the tube at the connection point (weld)
- Water hammer damping and better roughness coefficient for PE pipe.
Welding machine
Universal electrofusion machine up to 900mm
This Polymatic Plus model welding machine allows
to electro-weld PE parts from 20 to 900 mm.
Welding capacity: 900 mm
Voltage: 230v / 50Hz
Power: 2800W
Operating temperature: -10°C + 50°C
Memory: 1000PV
4.5m cable
Dimensions 440 x 380 x 320mm
Weight: 20kg
For all fittings from 20 to 900mm equipped
a standard-compliant barcode
French.
Avantages
- Robust
- Anti-shock protection casing.
- Extra-flexible cables resistant to high stresses (torsions, tractions, flexions).
- Checking machine input and output parameters.
- Tilting of the front for easy and better reading from the excavation and in the sun.
- Clear and readable display with contrast adjustment.
PLASSON electrofusion machine up to 355 mm
The MONOMATIC machine allows Plasson SMARTFUSE fittings to be welded without the need to read the bar code or take into account temperature compensation tables, which completely eliminates the margin of error in this area.
- Welding capacity: Ø355 mm
- Voltage: 230v / 50 Hz
- Power: 2600W
- Operating temperature: -10°C + 50°C
- 5m cable
- Dimensions 440 x 380 x 320mm
- Weight: 20 kg
- For all fittings up to Ø355 mm provided with a barcode compliant with French standards.
Avantages
- Robust
- Anti-shock protection casing.
- Extra-flexible cables resistant to high stresses (torsions, tractions, flexions).
- Checking machine input and output parameters.
- Tilting of the front for easy and better reading from the excavation and in the sun.
- Clear and readable display with contrast adjustment.
welding machine butt PLASSON
Butt welding machines heat the ends of tubes and bring them into contact by applying pressure to make the butt weld. The range of PLASSON machines can weld tubes with a diameter of 40 to 630 mm. For diameters greater than 630 mm, contact us.
Avantages
- Chassis with adjustable 3rd jaw for welding shaped parts.
- Heated mirror with electronic thermostat temperature control and overvoltage protection.
